• A different kind of engineering design firm

    • YES TO EVERY THING

  • Technologies Under Contract

    Now Licensing: MRC Passive Sensor and Software

    broken image

    Patented Technology FOR Motion Detection

    Gather, Motion, Respiratory and Cardiac data from people wirelessly

    In DOD sponsored government laboratories, a hidden secret was discovered... The human body and almost every animal has a low frequency electrical field that extends out and around them. Using sensitive electronics and image signal analysis, this field was seen to be operating at a frequency well below human perception. These inventors had discovered the human bio-field and soon discovered ways to uncover it's biggest secret... the field was rich with signals that once decrypted were found to contain bio-data! Using only an antenna they discovered ways to pull cardiac heart rate, respiration and other bio-data from this field.

    broken image

    Electronics and Signal Processing

    A new type of sensor needs a new type of circuit

    Available for licensing is a low cost electronic circuit which is capable of taking inputs from various antennae allowing the signals to be gathered both passively and in real-time. The electronics may be further miniaturized with additional development, all the way down to battery powered embedded wearables.  

    broken image

    Software

    Sophisticated Signal Processing Supports our Technology

    Available for immediate licensing. With 4 years of University level R&D the team has been writing code and developing algorithms that eliminate noise and decipher these signals from the above circuits. You will not be starting from scratch as each discipline has been carefully considered to ensure successful outcomes.

    broken image

    Research and Development

    Science has only scratched the surface

    So far, we've unraveled cardiac sinus rhythms, respiratory rates, motion and foot fall signals, we can even identify humans from other species! With continued R&D who knows what other information is available from the human bio-field? Our scientists have speculated that these 3-4 signals are only the beginning. What will you find? What new products are waiting to be invented? What technologies can be improved?

    broken image

    Potential Markets for mrc

    Telehealth, Health Care Robotics, Automotive are just the beginning

    In-patient, Out-patient or remote monitoring Gathering patient data wirelessly and passively without a patient even noticing may seem scary at first, but when you contrast that against the current cost of wired healthcare, having a simpler method of detection just makes sense. No wires or leads, electrodes or the bother of hooking up to instrumentation or recorders. Potential fields of medicine include neonatal and infant monitoring, cardiology, respiratory care and sleep studies.

     

    Health Care Robots or personal care robots many futurists say may be the answer for the rising cost of health care and nursing. As robots replace human workers, the robots ability to continually analyze and assess a patients vital signs may be a first line of alerting health care professionals to potential issues or emergencies. A mobile version of the sensor and embedded sensors in a healthcare robot only make sense

     

    Automotive and Airline each is an entire industry filled with sensors and instruments and systems dedicated to compliance of regulations. The FAA for example routinely uses check ups for pilots to look for heart problems. The automobile industry could benefit from life saving technology that detects the presence of nearby pedestrians or systems that can alert a distracted parent ready to close a burning hot car that their baby is still in the back seat.

     

     

     

    broken image

    Motion detection combined with video based machine learning

    The worlds most advanced deep learning algorithms, so efficient they are capable of running on a Raspberry Pi

    In-Situ remote monitoring Gathering compliance data or allowing entrance or exit based on the way a person is dressed may sound Orwellian, but when you consider this technology can embedded into vision based appliance no bigger than an earbud case that doesn't connect to servers, you realize at this point that privacy issues are virtually non-existent. In the end, having a simpler method of detection just makes sense.

     

     

     

     

    Human detection and face Mask Detection demo

    The worlds most advanced deep learning algorithms, so efficient they are capable of running on a Raspberry Pi

    Uniform and Dress Enforcement Whether your uniform includes features such as masks, head-ware, gloves or footwear, we can detect all of it. This makes an ideal package for enforcement. With the rising cost of labor, not every entrance and exit point can afford a security or compliance manager. A mobile version of this device and our deep learning algorithms can automate uniform compliance at a cost that justifies.

     

     

  • Success Stories

    Enjoy these select examples of our past work

    broken image

    Mobile WIFI Cameras

    Embedded solutions
    Compact WIFI and Bluetooth connected CMOS camera for remote monitoring of public transportation.  Development time >2 weeks 
    broken image

    LED Lighting Specialists

    Custom LED luminaries 
    Designed of the rigors of for machine vision in specialty applications and environments.  Strobes, line lights, inspection and special arrays for all manner of camera based machine vision systems for industry and DOD..
    broken image

    Video Borescope Innovators

    The ability to see into and around in the palm of your hand 

    We were there when a Flexible Shaft Camera with LED lighting replaced fiber optics. When industry asked for a better solution and we responded. The result? A multi-million dollar commercial success! The VideoStik not only set the bar for industrial bore scopes competitors but was the only commercially available product of its' time to break sales records in both commercial aviation, automotive and marine markets for 8 years in a row.

    broken image

    Ultra-miniature camera specialists

    Hand held digital bore-scope

    Camera based bore-scope product for the medical industry. Distal tip is a mere 5mm across and is detachable and disposable. Newer cameras are only an incredible 3mm in diameter.

    broken image

    Micro-video display recorder

    Breakthrough size and recording 

    Remote WIFI monitor, with build-in recording memory. The product was developed at a later date and added to an existing product line.

    broken image

    Solid State Signal Lighting

    LED based signal retrofit for industrial automation

    New electronics and PC Board are designed to replace incandescent lighting module to save on life, eliminate service intervals and increase reliability.

    broken image

    Video Stylet Camera

    Affordable video laryngoscope with disposable camera 

    Single use camera technology eliminates the possibility of cross contamination in patients. Patented camera writes a single use to the software forcing replacement each use. The results? A safer product and limited liability removing chance of contamination.  

    broken image

    IP 67 Rated LED Light

    For hazardous duty

    Designed for industrial robots and harsh environments as tough as mining of caustic potash by the Dead Sea. The product needed 100% reliability. Budget was met and lights were delivered on- time and continue to operate despite environments as high as 130 Fahrenheit.

    broken image

    LED Grow Lights

    Cutting edge technology for faster growing plants

    Research in color mixing of LED's and wavelengths for accelerating growth and increasing crop yields naturally is a growing field of study. Our systems are used by researchers and entrepreneurs alike in the exciting field of hydroponics and aquaculture.

    broken image

    High power strobe

    Long Range Illumination
    Built for tactical lighting applications, this high power strobe projected a tightly focused beam of while light or IR. It served as a strategic object illumination for a hidden camera system for a government agency.
    broken image

    A new type of light

    Innovative LED luminary replaces traditional florescent lighting en masse
    When manufacturers demanded a linear version of the familiar spotlight LED lights for vision systems in robot factories we responded with IsoLight.  The product was designed in one week and developed in less than eight weeks. Featuring all embedded drivers and a unique isometric lenticular diffuser. This helped eliminate harsh shadows, the resulting product was one of the most successfully marketed LED industrial illumination form factors to date for this industry. 
  • Product Design and Development... your way

    Variobotics, LLC was established by industry leading professionals with backgrounds in industries as diverse as the toy industry, robotic systems and automation, medical device manufacturing, micro-electronics, optics and lighting, business development and marketing. They recognized the need for companies interested in trying new ideas, but without the resources and contacts needed to create to new products and make their designs manufacture-able. Furthermore, they cooperated with their network and database of proven manufacturers in order to make these services available and cost effective.

    broken image

    The search for a masterpiece 

    We are here to serve you

    Just imagine having your very own engineering design firm... one that is in tune with your needs, your budget and your deadlines. Now imagine the cost of having all of these departments on your payroll... scary isn't it? Variobotics brings this all together for you in one easy to manage package. Pay for only what you need, in phases or by outcomes. Only Variobotics has relationships world wide with contract manufacturers and the ability to leverage our designs against manufacturing. We share the risk, ensure outcomes and pave the way for your success!

    broken image

    The voice of the customer

    We listen and we take the time to learn your business
    Brainstorming , concept development, manufacturability are all important to the outcome of any product development effort, however, without giving the customer a voice in the process, changes have a way of playing out into larger and larger budgets. Variobotics is different, we understand sales, we understand marketing and we understand customers. Just because something can be done, one-way, doesn't mean that it should always be that way. Talk to us, you'll soon see that path to market doesn't have to stress out either you... or your budget.
  • What We Do

    3D CAD Design Services, Product Engineering and Manufacturing

    broken image

    CAD Design helps clients and customers visualize their products

    Nobody does it better
    Taking an idea from napkin sketch to a full blown design which can be mass produced takes experience.  With a combined 90 years of product design and development in both alloys and plastics, electronic circuits, optics, cameras and lenses, you'd be hard found to a firm with our pedigree. 
    broken image

    Software Cameras optics and lighting

    A hard to find specialty
    If your design includes, optics lasers or a digital electronic imaging chain or fiber optics, you've found your home.  LED lighting, digital CMOS and CCD imaging cameras, retrofits, new lighting products are all within your reach.  Do you need a special controller or software developed to meet your specifications?  We have the experts on staff and in network to help you address performance and pricing.  
    broken image

    Manufacturing and Production

    From conception to production
    Only 3Point Solutions can help you design your product for mass production and then find a suitable manufacturer for your products both here and abroad. We have over 30 pre-qualified sources within our group manufacturing.  Let us take the hassles out of finding and vetting manufacturers up the task.  From production machining to 3D Printing and injection molding to electrical and electronics design and production.
  • Contact Us!

    Don't be afraid to reach out. Your ideas + us = awesome.